Post by faster23 on Sept 12, 2012 12:54:37 GMT -8
I have researched torque specs for clone motors and will post for those who need the information. If an admin could pin it so it stays at the top of the clone forum it may help.
Connecting Rod 9 ft. lbs. or 108 in. lbs (multiply ft. lbs. X 12 for in. lbs.)
Side Cover Bolts 17 ft. lbs.
Head Bolts 17 ft. lbs.
Header Nuts 17 ft. lbs.
Rocker Studs 17 ft. lbs.
Rocker Nuts 7 ft. lbs.
Flywheel Nut 54 ft. lbs.
Connecting Rod 9 ft. lbs. or 108 in. lbs (multiply ft. lbs. X 12 for in. lbs.)
Side Cover Bolts 17 ft. lbs.
Head Bolts 17 ft. lbs.
Header Nuts 17 ft. lbs.
Rocker Studs 17 ft. lbs.
Rocker Nuts 7 ft. lbs.
Flywheel Nut 54 ft. lbs.