|
|
Post by sea1tjd on Jun 9, 2014 11:01:57 GMT -8
I recently purchased a 2006 Invader kart with a PRD engine. I've looked everywhere and can’t find what my temperature should be. The person I bought it from told me it runs 190-200, and that is what it’s showing on the track, but it seems high.
Tim
|
|
|
|
Post by Ricky Worley on Jun 9, 2014 19:07:27 GMT -8
Tim,
If you're talking water temp, it should run around 130-150. If you're running a head temp (under the spark plug) it will be higher than that, and your temps may be close.
Sent from my HTCONE using proboards
|
|
|
|
Post by sea1tjd on Jun 9, 2014 20:14:41 GMT -8
Thanks Rick,
I believe the micron in reading the Head Temp. Still trying to understand all the electronics. Also, what is a good lube to use on the clutch bearing. I understand they need to be lubed every race/practice.
Tim
|
|
|
|
Post by Ricky Worley on Jun 9, 2014 20:24:30 GMT -8
Honestly I just spray chain lube in them and they're fine. It is best to take them apart and actually use grease every couple races though.
Sent from my HTCONE using proboards
|
|
|
|
Post by Ricky Worley on Jun 12, 2014 12:38:21 GMT -8
Are you going to be running here at TCKC?
Sent from my HTCONE using proboards
|
|
|
|
Post by sea1tjd on Jun 12, 2014 14:42:25 GMT -8
Rick im thinking about comming downn for the night race. I have to convince the better half, but it would be fun to come down to race you guys
Sent from my SAMSUNG-SM-N900A using proboards
|
|
John
Junior Member
Posts: 37
|
Post by John on Jun 16, 2014 23:56:19 GMT -8
Racing under the lights is truly a great experience. If you haven't done it yet.... you will want to. I can't think of very many tracks, if any, who have put the time and efforts into a track as much as this Board of Directors, City of Richland and various members have put in this track. They really strive for the "Cut Above" status. And just think..... This is only the beginning. :-)
|
|
|
|
Post by sea1tjd on Jun 17, 2014 14:01:20 GMT -8
Guys im actually thinking about comming down this weekend. Just curious where should I be starting for gear ratio?
Sent from my SAMSUNG-SM-N900A using proboards
|
|
|
|
Post by Ricky Worley on Jun 17, 2014 15:54:52 GMT -8
This weekend is a gold cup just so you know.
Sent from my HTCONE using proboards
|
|
|
|
Post by sea1tjd on Jun 17, 2014 18:04:17 GMT -8
Yes i know
Sent from my SAMSUNG-SM-N900A using proboards
|
|
|
|
Post by Ricky Worley on Jun 18, 2014 4:28:18 GMT -8
Ok, well I'd start with an 83t sprocket. That is if you have a 11t front sprocket which is standard.
Sent from my HTCONE using proboards
|
|
|
|
Post by sea1tjd on Jun 22, 2014 15:19:52 GMT -8
Rick thanks for your help yesterday.
Sent from my SAMSUNG-SM-N900A using proboards
|
|
|
|
Post by Ricky Worley on Jun 22, 2014 18:41:53 GMT -8
No problem, hope you had a good time.
Sent from my HTCONE using proboards
|
|
|
|
Post by sea1tjd on Jun 23, 2014 6:01:25 GMT -8
Yes had a great time. If you or any of the guys want to excape the boat races we are racing this sunday in Spokane. We'll honor your Tri-Cities membership for the race fee discount. If anyone wants to come up I can open up the track Saturday for practice. Just shoot me an email.
Thanks again,
Tim Draggoo
tdraggoo@spokanekarting.com
Sent from my SAMSUNG-SM-N900A using proboards
|
|
