Post by mrmoody on Jul 26, 2018 17:11:30 GMT -8
This has been in my garage collecting dust, but we just don't have the time to get back to racing. It's a perfect chassis for a LO206, or run it with the animal to get on track cheap and learn. Lots of spare parts and tools.
$1200 for Chassis and all spare parts (including motor mount)
$1500 Takes it all
Wildkart Cadet Chassis
Blackstar Racing JR1 Gas Animal
3 races on engine rebuild
Jet kit
SMC two-disc clutch
Spun Aluminum wheels w/MG tires
Digatron Data Acquisition Dash
Streeter folding Kart Stand
Spare Parts and Tools
Extra pair of wheels and MG tires
Sniper Laser Alignment Tool
6 RLV #35 Split Sprockets (53,54,55,56,57,58)
Sprocket Hubs
Short rear hubs
Front Rain Hubs (wide)
Steering shaft
Tie rods w/ends
Angled steering wheel hub
SMC Clutch Drum
SMC Clutch Spring Tool
Noram GE Clutch with multiple drums (16, 18, & 19 tooth)
GE Clutch Spring Tool
Animal exhaust pipe
Carburetor jet tool
AIM Timing Beacon
Digatron Timing Beacon
Lead weights (about 30-35#)
Large Fuel Tank
5 gallon fuel can (only had non-ethanol fuel in it)
Container with various nuts, bolts, axle keys, and other small spare parts
Picture Album:
goo.gl/photos/BZq6sSeTAzL6ZN219
email: steve.moody@gmail.com
Located in Portland area
$1200 for Chassis and all spare parts (including motor mount)
$1500 Takes it all
Wildkart Cadet Chassis
Blackstar Racing JR1 Gas Animal
3 races on engine rebuild
Jet kit
SMC two-disc clutch
Spun Aluminum wheels w/MG tires
Digatron Data Acquisition Dash
Streeter folding Kart Stand
Spare Parts and Tools
Extra pair of wheels and MG tires
Sniper Laser Alignment Tool
6 RLV #35 Split Sprockets (53,54,55,56,57,58)
Sprocket Hubs
Short rear hubs
Front Rain Hubs (wide)
Steering shaft
Tie rods w/ends
Angled steering wheel hub
SMC Clutch Drum
SMC Clutch Spring Tool
Noram GE Clutch with multiple drums (16, 18, & 19 tooth)
GE Clutch Spring Tool
Animal exhaust pipe
Carburetor jet tool
AIM Timing Beacon
Digatron Timing Beacon
Lead weights (about 30-35#)
Large Fuel Tank
5 gallon fuel can (only had non-ethanol fuel in it)
Container with various nuts, bolts, axle keys, and other small spare parts
Picture Album:
goo.gl/photos/BZq6sSeTAzL6ZN219
email: steve.moody@gmail.com
Located in Portland area