|
|
Post by rsection8 on Aug 24, 2011 3:33:01 GMT -8
I need a motor. Preferably a dupor or box stock. Or is there any place to order a clone motor that will make it here by friday?
Rob
|
|
|
|
Post by rsection8 on Aug 24, 2011 3:42:03 GMT -8
Or a clone head that fits Dupor Yellow.
My Valves and the Guide that fits inside the head is coming out, not sure if there's a way to press back in.
Robbie Dutton
509-823-0008
|
|
|
|
Post by Gorgeman on Aug 24, 2011 9:13:16 GMT -8
If you can find a kart shop in Northern California or closer you might get it by Friday. I think Eric Lane might know of a place. I left him a VM. Try www.kartparts1.com/index.php?content=kartshops. Or you could just replace the head. What are you doing up at 4:30 in the morning? |
|
|
|
Post by rsection8 on Aug 24, 2011 10:56:26 GMT -8
What are you doing up at 4:30 in the morning? Going to Work.  I think I got the help I needed. I was searching around, but couldn't find a dealer on the west coast besides Kart O Rama, and they are way over priced.. |
|
|
|
Post by Ricky Worley on Aug 24, 2011 12:07:01 GMT -8
If you still haven't found anything check with Keith, I think he may still have some brand new bsp yellow heads.
|
|
|
|
Post by Gorgeman on Aug 24, 2011 13:29:15 GMT -8
Eric says Fastech-racing.com or ECcarburetors.com have faster shipping.
|
|
|
|
Post by rsection8 on Aug 25, 2011 3:52:33 GMT -8
Well my buddy Randy thinks he pressed it back again. I'm not sure if I like the solution, but it's what he has done. Thanks for the responses, I think I have a backup head if I need one now. Fingers crossed it holds togethor. LOL. Rob --- Oh Ricky, you guys know anything about the Keystone can in the UPS Pickup Box?  |
|
